Banner Finishing Starter Kit
Banner Ups® Starter Kit
SKU: STARTKT4AS-1
“Everything you need to finish banners faster, stronger, and easier — enough for about 20 banners.”
The Banner Ups® Starter Kit lets you experience faster, stronger banner finishing. Includes 100 BravoTabs, one roll of Clear PowerTape (1.5″ × 36 yd), and one EZ Punch — enough to finish approximately 20 banners. The time savings on those 20 banners alone will more than pay for the cost of the kit.
SKU
Expert support: 618-281-8090
Kit Contents
What’s in the Box
100 Tabs Included
BravoTabs®
Crystal-clear adhesive tabs that apply to the corners and along the edges of your banner. BravoTabs spread wind stress over a much larger surface area than grommets — stronger and faster to apply.
1 Roll — 1.5″ × 36 yd
Clear PowerTape®
Crystal-clear single-sided banner hem tape. Run it along the top and bottom edges over the BravoTabs to reinforce the full edge without folding or sewing. Virtually invisible on mesh and double-sided banners.
1 Tool Included
EZ Punch
A compact hole punch that cuts clean hanging holes through the BravoTab, Clear PowerTape, and banner media in one squeeze. No drill, no grommet setter, no mechanical press — just a clean professional hole, fast.
Step by Step
Banner Done in Four Steps
Stick BravoTabs
Apply BravoTabs to the corners and along the edges of the banner. No tools needed — just peel and press. They bond firmly to the banner in seconds.
Run Clear PowerTape
Strip Clear PowerTape continuously along the top and bottom edges of the banner’s back side over the BravoTabs — corner to corner. The clear film eliminates the need for folded hems and is virtually invisible.
Punch with EZ Punch
Use the included EZ Punch to cut a clean hole through the tape, BravoTab, and banner media in one squeeze. Leave a ¼″ leeway from the tape edge for maximum strength.
Hang Your Banner
Thread bungee cord, zip tie, or rope through the punched holes and hang. Your banner is reinforced, professional, and ready to display — in under 3 minutes from start to finish.
How It Stacks Up
Starter Kit System vs. Traditional Grommeting
| Banner Ups® Starter Kit | Grommets + Traditional Tape | |
|---|---|---|
| Finish Time | Under 3 minutes per banner | 10–20 minutes per banner |
| Equipment Needed | Only what’s in the kit — zero machines | Grommet setter, press, cutting mat, eyelet dies |
| Holding Strength | Stronger — stress distributed over large tab area | Concentrated stress at small grommet hole — tears more easily |
| Wind Performance | Wind-tunnel tested system | No standardized wind test for grommet method |
| Learning Curve | Minimal — usable in minutes with no training | Operator skill required for clean grommet placement |
| Entry Cost | $88 kit covers 20 banners | Grommet press: $200–$800+, plus consumables |
Common Questions
Starter Kit FAQs
What comes in the Banner Ups® Starter Kit?
How many banners will the starter kit cover?
Can I reorder individual components after the kit runs out?
Is the starter kit suitable for outdoor banners?
How does Banner Ups compare to grommets?
5.0 out of 5 Stars — 6 Reviews
What Sign Pros Are Saying
“We’ve had much better luck ourselves as well at trade shows using the Banner Ups instead of hassling with a grommet punch. So much faster and they hold just as well — better, actually.”
“Your products were recommended to us by another sign company — holy cow, what a difference it made for our digital banners. We had creasing and wrinkling issues with our grommet method. Banner Ups completely solved it.”
“We purchased a starter kit and I have had the opportunity to use them already with great results. The banners look professional and finished in a fraction of the time. Will definitely reorder.”
“This is the perfect product to easily produce durable holes for banners. The EZ Punch cuts clean every time and the tabs hold like you wouldn’t believe. 5-star product all the way.”
“The Clear PowerTape and BravoTabs are super fast and easy to install saving me on labor costs. As a small business owner, every minute counts — this kit paid for itself on the first job.”
“Banner Ups products allow you to create super-strong banners instantly at a fraction of the time and cost of grommeting. Stronger than grommets because they spread the stress over a much larger area. I won’t go back.”
Try It Risk-Free
Ready to Start Finishing Banners Faster?
$88 gets you 100 BravoTabs, a full roll of Clear PowerTape, and an EZ Punch — everything you need to finish about 20 banners faster and stronger than grommets. Contact our team to order.
How Ordering Works
-
1
Add items to your order request
-
2
We connect you with your nearest Banner Ups distributor within 1 business day
-
3
Your distributor ships your order
Customer Reviews
Banner Ups products are superior to grommet punches for trade shows. Light, portable, clear, easier and faster to apply. You’ll never go back to traditional grommets!
The Awesome Starter Kit changed the game for me! Faster production, no more grommets, and the quality is incredible. A must-have for any banner shop.
Purchased the starter kit and had immediate positive results. These will be part of our regular banner offerings going forward. Great results every time!
The starter kit is superior to any traditional grommet maker. I ordered a second kit so we can run multiple banners simultaneously. A definite 5 star product!