FINISH STRONG WITH NEW CRYSTAL CLEAR BRAVOTABS® A STRONGER GROMMET/EYELET!
When it comes to finishing banners, Banner Ups® BravoTabs are a great new addition to your toolkit for three reasons. First they just as strong as Large Clear PowerTabs, however they are square in shape, so they work great both at corners and along banner edges – a “one size fits all” solution. BravoTabs are a great a grommets / eyelet replacement. Unlike, PowerTabs, there is no neck loop, which some customers would cut off if not used. With BravoTabs, there is no need to clip an unused neck loop. Finally, because they are a simpler shape, BravoTabs are faster to install than traditional grommets / eyelets – and that translates to a lower cost. BravoTabs are crystal clear banner tabs, allowing your color graphics to shine through. They easier to use compared to grommets / eyelets, versatile, and cost effective
- New simple shape works great at corners or along edges
- No neck loop for improved appearance
- Fast and easy to install
- Economically priced
Packaging: 4 tabs per sheet; 25 sheets/bag (100);
5 bags/case (500)
Tab Size: 3.875″x 1.875″
FREQUENTLY ASKED BRAVOTABS® QUESTIONS
BravoTabs® are square in shape so they work great for both corners and along edges. One tab fits all!
The neck loop on PowerTabs® and EdgeTabs® is only intended for light-duty use. Placing the rope through the tab center hole give much greater outdoor strength. As a result, many of our customers cut off the neck loop in order to prevent improper installation. With BravoTabs®, there is no neck loop to cut off. That saves time.
Absolutely. Though the shape is different, the surface area of the tab is virtually identical, and we use the same high-performance films and adhesives as the large Crystal Clear PowerTabs®.
For indoor banners or light duty outdoor banners, BravoTabs® may be used alone. However, for outdoor banners over 6 ft. in length or in areas of high wind exposure, we recommend using BravoTabs® together with PowerTape® for ultimate strength.
For banners up to about 6 ft in length, we recommend using four BravoTabs® at the banner corners. For banners over 6 ft in length, we recommend adding tabs along the edges about every 2-3 feet.
Using the Banner Ups PowerPunch® is the safest and easiest way to punch the tab center hole in the media. The PowerPunch® hole is perfectly sized and the PowerPunch® punches the hole at just the right position. Using a knife to cut the center hole is possible, but risky because if the tab is cut slightly it may diminish the banner strength significantly. The PowerPunch® is reasonably priced and heavy duty for long life.
"Banner Ups are super easy to use, and you can’t beat the clear! We have never looked back. Thanks for helping us stay ahead of the competition!
"A simple inexpensive solution that works. Really appreciate it. I've been in the business a long time- great fix for a very common problem."