Banner Ups® Starter Kit — adhesive tabs, clear hem tape, and EZ Punch tool

The No-Grommet Alternative

Replace Grommets Entirely.
No Machine. No Special Skills.

The Banner Ups® Starter Kit is everything you need to ditch grommets in one box — tabs, tape, and a punch tool. Finish banners 3× faster, with a stronger hold.

108 mph Wind-Tunnel Tested 3× Faster Than Grommets No Machine Needed
100 BravoTabs + 1 Roll Clear PowerTape + 1 EZ Punch

Questions? Talk to a banner expert: 618-281-8090  ·  Free samples available

108 mph Wind-Tunnel Tested
3× Faster — 1:40 vs 5:30 per banner
1,000s Print & Sign Shops Trust It
Free Samples Available

Why Switch

Grommets Slow You Down. This Kit Doesn’t.

The grommet problem

Grommets are slow to set, need a bulky machine and dies, and concentrate all the wind stress on one small hole — so banners tear at the grommet in heavy wind.

The Banner Ups® fix

Adhesive tabs spread the load over a much larger area than a grommet hole — a stronger hold that survived 108 mph wind-tunnel testing. No press, no dies, no learning curve.

Everything in one kit

No guessing what to buy. Tabs, clear hem tape, and the punch tool come together — 3× faster finishing (1:40 vs 5:30 per banner) straight out of the box.

Step by Step

Stick → Tape → Punch → Hang

Step 1: stick adhesive tabs to the banner edge
Step 1

Stick

Peel and press the adhesive tabs to the corners and edges of your banner. Bonds in seconds — no tools.

Step 2: run clear hem tape along the edge
Step 2

Tape

Run the clear hem tape along the edges over the tabs to reinforce the full hem — no folding or sewing.

Step 3: punch a clean hanging hole
Step 3

Punch

One squeeze of the EZ Punch cuts a clean hanging hole through tape, tab, and banner. No press, no dies.

Step 4: hang the finished banner
Step 4

Hang

Thread a zip tie, bungee, or rope and hang. Reinforced, professional, and done — 3× faster than grommets.

How It Stacks Up

Starter Kit vs. Grommets

Banner Ups® Starter Kit Grommets
Finish Speed 3× faster — 1:40 per banner Slower — about 5:30 per banner
Equipment Just what’s in the kit — no machine Bulky grommet press & dies required
Wind Performance 108 mph wind-tunnel tested Stress concentrated at one hole — tears more easily
Skill Needed None — anyone can do it Takes practice to set cleanly

Add It to Your Order

Banner Ups® Starter Kit

Banner Ups® Starter Kit — tabs, clear hem tape, and EZ Punch tool

SKU STARTKT4AS-1

Banner Ups® Starter Kit

100 BravoTabs + 1 Roll Clear PowerTape + 1 EZ Punch — everything you need to ditch grommets, in one kit.

Ready to Ditch Grommets?

Add the Starter Kit to your Order Request and finish your next banner 3× faster — no machine, no special skills, free samples available.