Hemming tape proves invaluable when you’re short on time and you need a strong solution for hemming your banner. Just measure the area to be hemmed, insert the tape between the fabric, and apply pressure. Banner Ups TexTape adhesive properties effortlessly seal the hem, allowing for hassle-free, no-sew hems. Here, Banner Ups explains in detail how to apply hemming tape like a professional.
Hemming Tape is Permanent
TexTape is a durable solution, making it an excellent substitute for traditional needle and thread methods. It is guaranteed to provide long-lasting results.
Step-by-Step Directions for Using Hemming Tape
Step 1: Prepare the Fabric
Ensure that your sign is clean, has been pre-washed, and is prepared to adhere to the hemming tape. Refrain from using fabric softener during the initial application, as it may compromise the adhesive bond, resulting in less secure tape adherence. If you need to adjust the size of the banner or sign, leave about 1 ¼ inch (3cm) for the seam allowance that will be on the hem. Hems can be left raw when using hemming tape, so you don’t have to sew the edge. However, if you have a sewing machine, it’s a good idea to finish it with a zig-zag stitch. Using pinking shears to cut the edge will also reduce fraying.
Step 2: Cut the Hemming Tape
Trim the hemming tape to match the length of the fabric requiring hemming. In the case of repairing a hem, measure the section that needs fixing and cut the tape accordingly.
Step 3: Apply the Hemming Tape
Place the hemming tape and apply pressure along the edge of the fabric. Remove the liner and fold the fabric and press again. The hemming tape has uniform properties on both sides.
Elevate the hem by the width of the tape plus an additional ⅛ inch (3mm). For example, if your tape measures 2 inches (3cm), raise the hem by 2 ⅛ inches (5.6cm). Ensure that none of the tape protrudes above the hem.
Adhere to the pressing instructions. If you’re dealing with a lengthy hemming task, press and hem small segments at a time.
Tips for Hemming Tape Use
- Experiment on a scrap piece of fabric to achieve the perfect tape insertion techniques and fabric compatibility.
- Apply firm pressure when pressing down on the hemming tape, ensuring that all sides are completely sticking.
- Employ a pressing cloth when dealing with delicate fabrics.
- When you feel confident about applying the tape to your hem, proceed step by step. Ensure the tape remains smooth throughout the process and prevent any twisting.
- Carefully press the hemming tape down on both sides of the hem, ensuring there are no wrinkles or folds that could spoil the overall appearance of your hem.
Purchase Banner Ups Hemming Tape Online Today!
Banner Ups carries a wide range of banner products to ease your installation process. From hem tapes to adhesive tabs, we have everything you need. Try TexTape today and contact us for more information!